GTD-3000Ex Intelligent Flammable Gas Detector o-100% LEL
Not quite sure?
Our expert team are here to help answer any questions you have and provide customised solutions. Send an enquiry today.
Meet our GTD-3000Ex Intelligent Flammable Gas Detector
Our flammable gas detector GTD-3000Ex has been developed to detect flammable gas leaks from spaces that produce or use flammable gases to prevent accidents. This GTD-3000Ex flammable gas detector is installed in areas for possible flammable gas exposure and is continuously monitored. Furthermore, this flammable sensor displays measurements on built-in displays (LCD) of the detector and provides an Analog 4~20 mA standard output signal. Also, for Analog 4~20 mA standard output, output signal transmission length between detector and receiver can be connected to 2,500 m. The GTD-3000Ex flammable detector must be used at a height below 1,000 m above sea level.
This self-contained gas detector does not need a controller, and it is usually installed on industrial sites, factories, gas storage, and manufacturers.
Detectable Gas | Ammonia (NH3) 0-100% LEL, Ethanol (C2H5OH) 0-100% LEL, Acetylene (C2H2) 0-100% LEL, Hydrogen (H2) 0-100% LEL, Methane (CH4) 0-100% LEL |
---|---|
Sensor Technology | Catalytic cell, Thermal conductivity cell |
Sensing Method | Diffusion |
Accuracy | ≤ ±3% / Full Range |
Display Type | LCD |
User Interface Type | Magnet-Bar, |
Recommended Supply Voltage | 24 VDC (±10%) |
Supply Voltage Range | 18 VDC to 31 VDC |
Supply Power (Max.) | 4.8 W @ 24 VDC |
Supply Current (Max.) | 200 mA @ 24 VDC |
Outputs | 1 x Analogue, 3 x Digital |
Output Specifications | 4-20 mA (500 ohms max load) |
Analogue Output Specifications | 4 – 20 mA |
Digital Communications | HART Interface |
Digital Output Specifications | Alarm1, Alarm2, Fault Relay |
Dimension | 156 × 322 × 110 mm (WxHxD) |
Weight | App. 1.8 kg |
Material Enclosure | Aluminum Alloy |
Material Sensor | Stainless Steel (STS316) |
Mounting | Wall mount |
Cable Entry | 2 x 3/4" NPT |
Operating Temperature | -20 to 60 °C |
Storage Temperature | -20 to 60 °C |
Operating Humidity | 5 to 99% RH (non-condensing) |
Operating Pressure | 90 to 110 KPa |
Max. Air Velocity | 6 m/s |
IP Rating | IP65 |
Certification | KCs: Ex d llC T6, T5, T4 |
Warranty | 2 Years |
Sensor Warranty | 1 Year |
Manuals
No manuals to display
Infosheets