Meet our Flush Mounted Refrigerant Gas Detector iR gas R513a
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The R513a refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Finally, Flush R513a Mounted Refrigerant Gas Leak Detector is suitable for indoor use only. For external environments, contact our specialists’ advice.
Meet our Flush Mounted Refrigerant Gas Detector iR gas R514a
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The R514a refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Finally, Flush R514a Mounted Refrigerant Gas Leak Detector is suitable for indoor use only. For external environments, contact our specialists’ advice.
Meet our Flush Mounted Refrigerant Gas Detector iR gas R448a
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The R448a refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Finally, Flush R448a Mounted Refrigerant Gas Leak Detector is suitable for indoor use only. For external environments, contact our specialists’ advice.
Meet our Flush Mounted Refrigerant Gas Detector iR gas R407a
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The R407a refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Finally, Flush R407a Mounted Refrigerant Gas Leak Detector is suitable for indoor use only. For external environments, contact our specialists’ advice.
Meet our Flush Mounted Refrigerant Gas Detector iR gas R410a
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The R410a refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Finally, Flush R410a Mounted Refrigerant Gas Leak Detector is suitable for indoor use only. For external environments, contact our specialists’ advice.
Meet our Flush Mounted Refrigerant Gas Detector iR gas R32
Our refrigerant leak detector with an infrared sensor functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas leak detector is designed to connect to a GDA gas detection controller or similar BMS system. This is to control alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
The R32 refrigerant gas leak detector with an Infrared Sensor, contains a Non-Dispersive Infra-Red (NDIR) gas sensor, operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Also, this sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
The iR-gas mounted refrigerant gas has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Finally, Flush R32 Mounted Refrigerant Gas Leak Detector is suitable for indoor use only. For external environments, contact our specialists’ advice.
Meet our iR-gas R513a Refrigerant Gas Detector enabled with an Infrared Sensor
Our R513a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas R514a Refrigerant Gas Detector enabled with an Infrared Sensor
Our R514a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R514a refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas R448a Refrigerant Gas Detector enabled with an Infrared Sensor
Our R448 refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R448 refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas R410a Refrigerant Gas Detector enabled with an Infrared Sensor
Our R410a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R410a refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas 3100 Refrigerant Gas Detector enabled with an Infrared Sensor
Our refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas R410a Refrigerant Gas Detector enabled with an Infrared Sensor
Our R410a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R410a refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas R404a Refrigerant Gas Detector enabled with an Infrared Sensor Our R404a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas…
Meet our iR-gas R407a Refrigerant Gas Detector enabled with an Infrared Sensor
Our R407a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R407a refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas R32 Refrigerant Gas Detector enabled with an Infrared Sensor
Our R32 refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R32 refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.
Meet our iR-gas R134a Refrigerant Gas Detector enabled with an Infrared Sensor
Our R134a refrigerant gas detector with infrared sensor, “iR-gas” functionality is to detect the presence of the target refrigerant gas in the air surrounding it. This refrigerant gas detector with an enabled infrared sensor is designed to be connected to a GDA gas detection controller or similar Building Management System(BMS). This infrared sensor will control the alarm systems and/or ventilation to reduce gas loss and potentially harmful situations.
Our R134a refrigerant gas detector contains a Non-Dispersive Infra-Red (NDIR) gas sensor and is operating via natural diffusion. This sensor is designed to give long service life under normal ambient operating conditions. Its sensor technology allows greater accuracy and lower cross-sensitivity to other gases, majorly reducing false readings when other gases are present.
Our iR-gas refrigerant gas detector has the following technical features: Range: 0-1000 ppm; NDIR Sensor, Output: 4-20 mA, 0-20 mA, 0-5 VDC or 0-10 VDC, Alarm Relay, Power: 24 VDC 3-wire powered, Factory set alarm: 250 ppm, Factory Calibrated Output set to 4-20 mA.