fbpx

Carbon Dioxide (CO₂)

Not quite sure?

Our expert team are here to help answer any questions you have and provide customised solutions. Send an enquiry today. 

Carbon dioxide (chemical formula CO
₂) is an acidic, colourless gas with a density about 53% higher than that of dry air. Carbon dioxide molecules consist of a carbon atom covalently double bonded to two oxygen atoms. It occurs naturally in Earth’s atmosphere as a trace gas. The current concentration is about 0.04% (412 ppm) by volume, having risen from pre-industrial levels of 280 ppm. Natural sources include volcanoes, hot springs, and geysers, and it is freed from carbonate rocks by dissolution in water and acids. Because carbon dioxide is soluble in water, it occurs naturally in groundwater, rivers and lakes, ice caps, glaciers, and seawater. It is present in deposits of petroleum and natural gas. Carbon dioxide has a sharp and acidic odour and generates the taste of soda water in the mouth. However, at normally encountered concentrations it is odorless

Products in category: Carbon Dioxide (CO₂)

Showing all 15 results

  • iR-gas Carbon Dioxide (CO₂) Gas Detector 4350

    The GDA 4350 is a 3 wire Non-Dispersive Infrared (NDIR) Carbon Dioxide (CO₂) sensor. It gives a 4-20 mA, 0-20 mA, 0-5 V or 0-10 V o/p over the range of the sensor. Low-Temperature version is available.

  • Infrared CO2

    iR-gas Carbon Dioxide (Infrared CO2) Gas Detector 0-5% Vol. in Brass stinting

    Meet our Infrared CO₂ Gas Detector iR-gas 4370 Brass stinting The Infrared CO2 gas detector, iR-gas 4370, is designed for use in safe area applications. This infrared CO2 sensor uses the latest laser semiconductor technology for the detection of carbon dioxide (CO2). This Infrared CO2 and electronics are one homogenous unit and must never be…

  • iR-gas Flush Mounted Carbon Dioxide (CO₂) Gas Detector 4360

    The iR-gas Flush Mounted Carbon Dioxide (CO2) is a 3 wire 4-20 mA Non-Dispersive Infrared (NDIR) Carbon Dioxide (CO₂) sensor. It gives a 4-20 mA o/p over the range of the sensor. Designed for applications where low-profile intrusion into a room space is required.

  • CO2 Detector Alarm

    Carbon Dioxide CO2 Detector Alarm Deskie

    Meet our Carbon Dioxide CO2 Detector Alarm Deskie

    Our Carbon Dioxide (CO2) Detector Alarm “Deskie” is helpful for monitoring the Carbon Dioxide (CO2) level in indoor spaces, mainly in schools, offices, houses, hospitals, and aged care, among others.

    This CO2 Detector Alarm warns you of poor air quality and that ventilation is required to renew the room’s air with fresh air. Not avoiding poor air quality can be a high risk of potentially contagious viruses or bacteria, low productivity in students and employees losing attention and focus, and unexpected unsafely events.

    This Carbon Dioxide (CO2) Detector Alarm, “Deskie” was designed for air quality purposes that impact significantly to people who spend time in indoor areas or spaces for their health, productivity, and safety.

    Moreover, this Carbon Dioxide (CO2) Detector Alarm helps to remain the air quality in good condition fresh, and clean, allowing people the adequate protection of human health and well-being.

  • infrared sensor IECEx certificate

    GIR-3000 IECEx Infrared Gas Detector Carbon Dioxide (CO₂) 0-5% vol.

    Continuous detection of flammable, CO₂, CO and N₂O gases in explosion hazardous area with flame proof structure State-of-the art infrared detection principle Long service life time (more than 5 years) Operation in non oxygen environment Self diagnosis function with built-in Microprocessor Fast response time(<5 sec) Built-in back light LCD or OLED display Auto calibration and…

  • Carbon Dioxide Gas 20% vol. (CO2/AIR) 6D 103L

  • Carbon Dioxide Gas 5% vol. (CO2/AIR) 10AL 112L

  • Carbon Dioxide Gas 50% vol. (CO2/N2) 2AL 34L

  • Carbon Dioxide Gas 2.5% vol. (CO2/N2) 8AL 58L

  • Carbon Dioxide Gas 5% vol. (CO2/N2) 8AL 58L

  • Carbon Dioxide Gas 0.5% vol. (CO2/N2) 8AL 58L

  • Carbon Dioxide Gas 3% vol. (Oxygen 20.9% vol.)(CO2/O2/N2) 8AL 58L

  • Senko iGas CO₂ Portable Detector IR 0-5% vol.

    The iGAS CO₂ is a Single Gas personal monitor for carbon dioxide detection. iGAS CO₂ uses a low-power NDIR (non-dispersive infrared) sensor to provide fast and accurate detection in a compact and lightweight package. iGAS is designed to withstand the harshest industrial working conditions, with an IP66/67 protection rating, and delivers industry-leading operating time with…

  • Carbon Dioxide Gas 1000 ppm (CO2/AIR) 8AL 58L

  • Synthetic Air (400 ppm CO2/20.9% vol. O2/N2) 8AL 58L

Request a Quote