fbpx

Battery Room Systems

Not quite sure?

Our expert team are here to help answer any questions you have and provide customised solutions. Send an enquiry today. 

Battery rooms keep the build-up of hydrogen and chemicals separate from the main building. Charging and using lead acid batteries produces hydrogen gas which poses an explosion risk above 4% vol. Ventilation is recommended to maintain hydrogen gas below 2% vol. Ventilation failure can cause a build-up of hydrogen gas therefore an alarm from a hydrogen monitoring system is recommended.

Products in category: Battery Room Systems

Showing all 9 results

  • flammable gas detector 300Ex

    GTD-3000Ex Intelligent Flammable Gas Detector o-100% LEL

    Meet our GTD-3000Ex Intelligent Flammable Gas Detector

    Our flammable gas detector GTD-3000Ex has been developed to detect flammable gas leaks from industrial sites, factories, gas storage, and manufacturers that produce or use flammable gases to prevent accidents.

    The GTD-3000Ex flammable gas detector is installed in areas where it is a risk for flammable gas exposure and is continuously monitored. It displays measurements on built-in displays (LCD) of the detector and provides an Analog 4~20 mA standard output signal. Also, for Analog 4~20 mA standard output, output signal transmission length between detector and receiver can be connected up to 2,500 m. The GTD-3000Ex flammable gas detector must be used at a height below 1,000 m above sea level.

  • Flammable Gas Detector

    GTD-2000Ex IECEx Flammable Gas Detector 0-100% LEL

    Meet our Flammable Gas Detector GTD-2000Ex IECEx

    The continuous detection of flammable gases in explosion hazardous areas with flameproof structure.

    Some technical features: The Self-diagnosis function with built-in Microprocessor Detection gas from low to high concentration owing to various detection principles. Stable quality and proved detection principle for service life. Built-in backlight LCD or OLED display. Easy Configuration of monitoring by HART communication. Auto calibration and program setting with a magnet bar. 4-20mA (Current source or sink) output signal. Calibration and maintenance by one man with the alarm unit (GTL-100): Normal: Green LED, Alarm: Red LED, Buzzer (95 dB), and rouble: Yellow LE.

  • GTD-5100F Explosion Proof Sampling Gas Detector

    Continuous detection of VOC gas in explosion hazardous area with flame proof structure Self diagnosis function with built-in Microprocessor Easy replacement with a cartridge type sensor Digital flow sensor to maintain regular flow rate Fast response of gas leakage with a high efficient pump inside Low concentration VOC gas detection by PID sensor Stable quality…

  • Senko iGas CO₂ Portable Detector IR 0-5% vol.

    The iGAS CO₂ is a Single Gas personal monitor for carbon dioxide detection. iGAS CO₂ uses a low-power NDIR (non-dispersive infrared) sensor to provide fast and accurate detection in a compact and lightweight package. iGAS is designed to withstand the harshest industrial working conditions, with an IP66/67 protection rating, and delivers industry-leading operating time with…

  • SGT-P Portable Gas Detector Hydrogen (H₂) 0-1000 ppm IECEx Approved

    The SGT-P portable is a single gas detector designed to detect hydrogen sulphide (H2S), carbon monoxide CO), Ammonia (NH3), Hydrogen (H2), Sulphur dioxide (SO2), or oxygen (O2). The SGT-P has a replaceable gas sensor and battery, giving an unlimited lifetime of operation. When activated, SGT-P continuously monitors ambient air for the presence of a specific…

  • GTD-5000F(Txp) Explosion Proof Sampling Gas Detector with Pyrolyzer

    Continuous detection of toxic gases and oxygen in explosion hazardous area with flameproof structure. Self-diagnosis function with built-in Microprocessor. Easy replacement with a cartridge type sensor. Digital flow sensor to maintain regular flow rate Fast response of gas leakage with a high efficient pump inside. Stable quality and proved detection principle for service life Excellent…

  • GTD-5000F Explosion Proof Sampling Gas Detector

    Continuous detection of toxic gases and oxygen in explosion hazardous area with flameproof structure. Self-diagnosis function with built-in Microprocessor. Easy replacement with a cartridge type sensor. Digital flow sensor to maintain regular flow rate Fast response of gas leakage with a high efficient pump inside. Stable quality and proved detection principle for service life Excellent…

  • 2 Channel Gas Detection Controller with LCD Display

    This complete 2 channel controller packs a punch with the ability to give you many options within a single package. This unit boasts 3 analogue outputs while having 3 alarm levels for each input channel, a fault relay is also ready to inform you of a system error. This controller allows you to have 2…

  • 8 Channel Gas Detection Controller with LCD Touch Screen

    GDA’s premium controller has many different applications due to its versatility. It boasts a full colour touch screen which allows you to view all of the 8 inputs individually. This unit has 8 configurable relays allowing you to control alarms along with Shut-off valves, fans solenoids where required (you may need extra equipment to enable…

Request a Quote